Shop

JA Solar Mono PERC Half-Cell MBB LR Traceable 565W MC4

Original price was: £109.80.Current price is: £98.40.

Product Features:

  • Reduced Levelized Cost of Energy (LCOE): Helps lower the overall cost of energy production, increasing system efficiency.
  • Enhanced Shading Performance: Multi-busbar (MBB) technology ensures improved energy generation even in partially shaded conditions.
  • Superior Durability: Better mechanical load tolerance increases the panel’s lifespan.
  • Optimized for High Temperatures: Lower temperature coefficient ensures consistent power output under high-temperature conditions.
  • Warranty Coverage:
    • 12-Year Product Warranty
    • 25-Year Linear Power Output Warranty
  • High-Quality Connectors: Equipped with Staubli MC4 connectors for secure and efficient installation.

Additional Details:

  • Authorized Reseller: Segen Solar is an approved distributor for JA Solar products. A verification letter is available in the document section.
  • Installation Requirements:
    • Forklift Onsite: Due to the size and pallet design, a forklift truck is required for unloading.
    • Regulations in Germany: These modules are restricted to building-independent solar systems in publicly inaccessible areas, with a height limit of 3 meters.
  • Qualified Installation Necessary: Installation must be performed by a certified electrician or technician following local wiring regulations. SegenSolar assumes no responsibility for malfunctions caused by improper installations.

JA Solar Mono PERC Half-Cell MBB Traceable 500W Silver Frame TS MC4 Connectors

Original price was: £95.70.Current price is: £74.73.

JA Solar 500W Mono PERC Half-Cell MBB Traceable Silver Frame TS with MC4-EVO2 Connectors

This advanced panel is specifically designed for customers who prioritize transparency in material sourcing. Its components are fully traceable, ensuring high-quality manufacturing.

Key Features:

  • Rated Maximum Power (Pmax): 500W
  • Module Efficiency: 21.1%
  • Dimensions (L x W x D): 2093 x 1134 x 30 mm
  • Frame Colour: Silver
  • Backsheet: White

Electrical Specifications:

  • Open Circuit Voltage (VOC): 45.59 V
  • Maximum Power Voltage (VMPP): 38.35 V
  • Maximum Power Current (IMPP): 13.04 A
  • Short Circuit Current (ISC): 13.93 A

Connector:

  • Type: MC4-EVO2

Packaging Information:

  • Pieces per Pallet: 36
  • Pieces per Container: 792

Warranty:

  • Product Warranty: 12 Years
  • Performance Warranty: 25 Years

UK-Specific Note:

Please note that these modules may appear slightly warped when placed against a flat surface. This is not considered a defect and has no effect on performance or longevity. This issue is fully covered under JA Solar’s manufacturer warranty.

JA Solar n-type 595W Bifacial Double Glass Half-Cell MBB Traceable LB MC4

Original price was: £120.60.Current price is: £108.18.

595W N-Type Double Glass High Efficiency Mono Module

Key Features:

  • Exceptional Power Output (595W): Ideal for residential, commercial, and industrial applications with outstanding energy efficiency.
  • N-Type Cell Technology: Delivers enhanced efficiency, reliability, and extended lifespan compared to conventional solar modules.
  • Durable Double Glass Design: Provides superior resistance to environmental factors such as moisture, dust, and extreme temperature changes, ensuring long-term performance.
  • Bifacial Technology: Captures sunlight from both the front and rear sides, increasing energy generation.

Warranty Coverage:

  • Product Warranty: 12 years.
  • Linear Power Output Warranty: 30 years.

Integrated Traceability:
The JA Solar Integrated Traceable System ensures transparency regarding materials and components used in production.

Additional Information:

  • Authorized Reseller: Segen Solar is a certified distributor of JA Solar products. Refer to the letter in the document section for further details.
  • Handling Requirements: A forklift is required onsite to offload panels due to their size and pallet design.
  • Germany-Specific Installation Restriction: In Germany, these modules can only be installed on building-independent solar systems in publicly inaccessible areas with a maximum height of 3m.

Installation Guidelines:

  • The product must be installed by a qualified electrician or technician.
  • Compliance with local wiring regulations and standards is mandatory.

Disclaimer:
SegenSolar will not be liable for any malfunctions or warranty claims arising from improper installation. Always ensure professional handling and adherence to regulations.

JA Solar n-type 600W Bifacial Double Glass Half-Cell MBB Traceable LB MC4

Original price was: £112.60.Current price is: £100.18.

Product Features:

  • Higher Power Generation: Delivers improved energy output, ensuring a better Levelized Cost of Energy (LCOE).
  • N-Type Technology: Features very low Light Induced Degradation (LID), enhancing module efficiency and durability.
  • Enhanced Illumination Response: Performs well under low light conditions, increasing energy yield in diverse environments.
  • Optimized Temperature Coefficient: Maintains high power output even at elevated temperatures.
  • Warranty:
    • 12-Year Product Warranty
    • 30-Year Linear Power Output Warranty

Additional Information:

  • Authorized Reseller: Segen Solar is an approved distributor of JA Solar products. Refer to the letter in the document section for more details.
  • Handling Requirements:
    • Forklift Necessary: A forklift is required onsite for unloading due to the size of the panels and the gaps in pallet slats.
  • Installation Guidelines:
    • In Germany, this module is only approved for use in building-independent solar systems located in publicly inaccessible areas and installed at a maximum height of 3 meters.
    • This product must be installed by a certified electrician or technician.

Disclaimer:
All installations must comply with local wiring regulations and standards. SegenSolar does not assume liability for product malfunctions caused by improper installation.

K2 Adaptor plate M10 HangerBolt Climber

£1.15

K2 Adapter Plate M10 Hanger Bolt Climber

The K2 Adapter Plate is a high-quality aluminum mounting plate designed for M10 hanger bolts. It is ideal for use with the Climber Set or as an accessory for the Dome FixPro system, ensuring secure and reliable installation.

Specifications:

  • Material: Aluminum
  • Dimensions (W x H x D): 50 x 5 x 90 mm

K2 Add On

Original price was: £2.50.Current price is: £1.00.

K2 Add-On – Rail-Share Mounting Adapter

The K2 Add-On is a rail-share mounting solution designed to streamline PV module installations by eliminating the need for additional rails or clamps. Instead, modules are secured using Add-Ons, allowing a shared-rail configuration where a single rail supports modules both above and below.

Key Features:

  • Efficient Rail-Share System – Reduces material usage and installation time
  • Universal Compatibility – Fits K2 SolidRails, CrossRails, SingleRails, and SpeedRails
  • Durable Material – Made from glass-fiber reinforced polyamide for long-term reliability
  • Adjustable Fit – Compatible with module frame heights of 35-50 mm
  • Bulk Packaging Available – Also sold in boxes of 250 units

K2 BasicRail 22 3.65m

Original price was: £19.81.Current price is: £16.80.

K2 BasicRail 22 3.65m

The K2 BasicRail 22 is a quick-mounting rail designed for secure and efficient PV installations. It features static confirmation in K2 Base and is ideal for trapezoidal sheet metal roofs when used with the BasicClip. It also serves as a base rail for the K2 Dome System.

Key Features:

  • Length: 3.65m | Height: 22.5mm
  • Compatible with:
    • K2 BasicRail System
    • Dome 6 System
    • Dome Zero System
    • MultiAngle System
  • Material: High-quality aluminium EN AW-6063 for durability and corrosion resistance

K2 Body Washer for M8 bolt connections

Original price was: £19.81.Current price is: £16.80.

K2 Body Washer for M8 Bolt Connections

The K2 Body Washer is designed for secure and durable M8 bolt connections, ensuring a strong and reliable fastening solution for PV mounting systems.

Key Features:

  • Material: High-quality stainless steel A2 for corrosion resistance
  • Dimensions: 8.4 x 30 x 1.5 mm
  • Weight: 0.01 kg
  • Warranty: 12 years (when installed correctly)
  • Certified: Compliant with EN, CE standards

Packaging Option: Also available in a box of 200 units.

K2 Climber for SingleRail 36/50 M10

Original price was: £2.69.Current price is: £1.00.

K2 Climber for SingleRail 36/50 M10

The K2 Climber 36/50 M10 is designed for secure and reliable attachment of SingleRail or CrossRail mounting rails to M10 hanger bolts. It is also compatible with K2 Dome FixPro sets, providing a strong and stable connection in solar mounting systems.

Specifications:

  • Material: Aluminium EN AW-6063 T66
  • Application: Mounting SingleRail or CrossRail to M10 hanger bolts
  • Compatibility: Suitable for use with K2 Dome FixPro sets

Packaging: Available individually or in a box of 250 units.

K2 Collar Nut M8

Original price was: £2.11.Current price is: £1.00.

K2 Collar Nut M8

The K2 Collar Nut M8 is a hexagon flange nut with serration designed for secure fastening in PV mounting systems. The locking splines prevent accidental loosening, ensuring long-term stability.

Features:

  • Standard: DIN 6923
  • Locking Mechanism: Serrated flange prevents unintentional loosening
  • Material: Stainless steel A2 – corrosion-resistant and durable
  • Thread Size: M8

Packaging Options:

  • Also available in a box of 100 units

K2 D-Dome 6.10 Base Set

Original price was: £39.44.Current price is: £32.11.

K2 D-Dome 6.10 Base Set

The K2 D-Dome 6.10 Base Set is a pre-assembled basic rail set designed for the D-Dome 6.10 system, suitable for module widths between 960 mm and 1170 mm. This system ensures efficient and secure mounting for solar panels on flat roofs.

Specifications:

  • Height: 77.5 mm
  • Length: 2.48 m
  • Width: 75 mm
  • Module Width Compatibility: 960 – 1170 mm
  • Mounting System: K2 Dome 6 System
  • Material: Aluminium (mill finish)

Included Components:

  • 1 x BasicRail (2.48 m)
  • 2 x Dome 6.10 SD
  • 2 x Dome 6 EndPlate
  • 3 x Dome Mat S

Packaging: Available individually or in bulk orders.

K2 Dome 6.10 Peak with Hole

Original price was: £5.42.Current price is: £4.00.

K2 Dome 6.10 Peak with Hole

The K2 Dome 6.10 Peak with Hole is a key component for module elevation in the Dome 6.10 system. It can be clicked into the pre-assembled base plate or fixed directly to the SpeedRail using a socket head bolt and MK2 for a secure installation.

Features:

  • Compatible with: Dome 6.10 system
  • Installation Options: Click-in or bolt fixation
  • Material: Aluminium EN AW-6063 T66 – lightweight and corrosion-resistant

Additional Information:

  • Replaces item: 2003248

Why Choose BuyPVSolar for Your Solar Needs?

Best Prices & Discounts

Enjoy special offers and seasonal discounts to save more. Make the switch to affordable solar energy today!

Secure Payment Options

Pay securely with Bank Transfer or PayPal and enjoy a fast, easy, hassle-free shopping experience.

Next-Day Delivery

Order today and enjoy Next-Day Delivery on all solar products! Quick, reliable, and ready to power your future.

Easy Return Policy

Shop with ease! Our Easy Return Policy makes returns simple and stress-free if you're not completely satisfied.